Manual 3 Piece Flanged Ball Valve

Corrosion
Resistant
Leak Tight
Sealing
Automated
Operation
Low Maintenance
Long Life

Alis Valves is Manual 3 Piece Flanged Ball Valve Manufacturer in india designed for reliable on/off flow control in industrial piping systems. Its three-piece construction allows convenient maintenance, while the flanged ends provide a secure connection to the pipeline. Suitable for water, oil, gas and compatible process fluids, it is available in different sizes, materials and pressure ratings to suit application requirements.

Product Specifications and Overview

A Manual 3 Pc Flanged Ball Valve is used to start or stop fluid flow in industrial pipelines. It operates with a hand lever that turns the internal ball by 90 degrees, allowing quick operation without an external power source.

The three-piece body design makes maintenance more convenient than many one-piece valve designs. Depending on the construction, the centre section can be accessed for inspection, cleaning or servicing without removing the entire valve body from the pipeline. Flanged end connections provide a stable, bolted connection and are suitable for a wide range of industrial installations.

The valve is commonly used in water supply, oil and gas handling, chemical processing, general manufacturing and utility lines. Material selection, seat type, pressure rating and temperature limits should be checked against the fluid and operating conditions before installation.

Size Range

½″ to 8″ (DN 15 to DN 200), subject to availability

Pressure Rating

Class 150 / Class 300, as per design

Body Material

SS304, SS316, Carbon Steel (WCB)

Ball Material

SS304 / SS316

Seat Material

PTFE / RPTFE

Flange Standard

ASME B16.5 / EN 1092-1, as specified

Port Design

Full Bore / Reduced Bore, depending on model

Temperature Range

Depends on seat material and pressure rating

Mounting

Inline Pipeline Installation

Manual 3 Piece Flanged Ball Valve

Industries Served

Cement

Cement

Engineered valve solutions tailored for critical Cement operating processes.

Chemical

Chemical

Engineered valve solutions tailored for critical Chemical operating processes.

Data centres

Data centres

Engineered valve solutions tailored for critical Data centres operating processes.

Fertilizer

Fertilizer

Engineered valve solutions tailored for critical Fertilizer operating processes.

Applications

Ammonia

Ammonia

High-performance flow automation engineered for Ammonia operations.

CO₂

CO₂

High-performance flow automation engineered for CO₂ operations.

Compressed Air

Compressed Air

High-performance flow automation engineered for Compressed Air operations.

Cryogenic

Cryogenic

High-performance flow automation engineered for Cryogenic operations.

Download Brochure

Manual 3 Piece Flanged Ball Valve Product Brochure

alis-valves-catalogue.pdf

Download File

Frequently Ask Questions

It is a quarter-turn valve with a three-piece body, flanged pipeline connections and a manual lever for opening or closing the flow passage.
Turning the handle by approximately 90 degrees rotates the ball. When the bore aligns with the pipeline, the valve is open; when the bore turns across the flow path, it is closed.
A standard ball valve is primarily designed for on/off service. Continuous throttling may cause seat wear or unstable flow; use a suitable control valve when accurate flow regulation is required.
Yes, for compatible chemicals. The suitability of SS304 or SS316 must be checked against the specific chemical concentration, temperature and operating conditions. The seat and seal materials must also be compatible.
The construction provides access to internal components for inspection and servicing. The exact maintenance procedure depends on the valve design and manufacturer’s instructions.
PTFE is a common option because of its chemical resistance and low friction. The correct seat depends on the fluid, temperature, pressure and required sealing performance.
It can be suitable when the selected valve design, pressure class, materials and temperature rating meet the operating requirements. The rating must be verified for the exact model.