Electric Remote Control Float Valve
Resistant
Sealing
Operation
Long Life
Electric Remote Control Float Valve is a diaphragm-operated hydraulic control valve designed for automatic water level control in tanks, reservoirs, water towers and water supply systems. The valve uses a float switch and electrical control signal to automatically open or close the main valve according to the required water level. When the water level falls below the preset level, the control system allows the valve to open and replenish the tank. When the water reaches the required level, the valve closes and stops the water supply.
Specifications
Size Range
DN50 – DN300
Body Material
Ductile Iron / Cast Iron / Stainless Steel
Seat Material
Stainless Steel / Suitable Elastomer
Working Temperature
0°C to 80°C*
Control Signal
Dry Contact / Electrical Signal
Pressure Rating
PN10 / PN16
Diaphragm Material
EPDM / NBR
End Connection
Flanged
Power Supply
24V DC / 220V AC
Float Cable / Length
5 m / 10 m / 15 m
Product Images
Frequently Ask Questions
It is a hydraulic diaphragm control valve used to automatically control the water level in a tank or reservoir using a float switch and electrical control system.
A conventional float valve primarily uses mechanical/hydraulic float operation. An electric remote float valve adds an electrical control function, allowing remote operation and additional control logic.
The float switch detects the low level and the pilot-control system causes the main valve to open, allowing the tank to refill.
Yes. The electric remote-control configuration can receive an electrical control signal for remote operation, depending on the selected control arrangement.
Yes. Automatic tank filling and water-level control is one of the main applications of this valve.
The float switch detects the water level and operates the pilot-control system. When the level is low, the main valve opens; when the required level is reached, the main valve closes.
106X is a commonly used model designation for an electric remote-control float valve based on a hydraulic diaphragm main valve with electrical/solenoid control.
When the water reaches the preset high level, the float switch changes state and the main valve closes, stopping further water supply.
Yes. Some designs allow the float/control assembly to be installed separately from the main valve, which can help avoid direct effects from turbulence near the valve inlet.
ALIS Valves manufactures and supplies industrial valve solutions in India. For Electric Remote Control Float Valve requirements, customers should provide the required valve size, pressure, flow rate, tank/reservoir details and control requirements for proper selection.
